|
Posted: 6/06/2003
VERSION 2.51 RBCA TIER 2 SOFTWARE
Version 2.51 is a maintenance release which replaces all versions of 2.3x
(2.30, 2.31, 2.32, 2.33, 2.34, 2.35, 2.36) and 2.40. If you have not
installed any versions of 2.3x or 2.40 you do not need to install them. Use
version 2.51 in place of all versions of 2.3x and 2.40. See
installation
instructions.
Version 2.51 is installed as a separate program from previous installations of
2.3x and 2.4. Do not delete data files you created with version 2.30, 2.31, 2.32,
2.33, 2.34, 2.35, 2.36 or version 2.40. The data file format has not changed.
If you created data files using any version of 2.3x, or 2.40 they will work fine
for v2.51.
In going from version 2.40 to version 2.51, several changes have been
made, mostly related to the SMR portion of the software. For further detail
on these changes refer to the Tier 2-SMR Version 2.51 User’s Manual. In
general, Tier 2 modifications were made under the following sections:
- Bug Fix - Surface Water Bodies
- Bug Fix - E Wells at SMR
- Vapor Receptors: Lower Limits for Groundwater Target Levels
- Actual Sanitary Sewers: Default Volume to Area
- Non-Detect Groundwater and Soil Data
- Risk Classification for Soil Vapor, Soil to Plastic Water Line
- Soil Gas Data Analysis
- Additional Corrective Action Legends
- Groundwater and Soil Plume Contouring
SMR- the remaining changes all relate to the SMR portion of the software:
- SMR: Groundwater Plume Contouring
- SMR: Corrective Action Taken Column
- SMR: Consistency Check
- SMR: Addition to check list –Corrections to Tier 2 Deficiencies
- SMR: GW Monitoring Plan, Minimum Frequency Column
- SMR: GW Monitoring Results for NFA Receptors
- SMR: Soil gas methods
- SMR: Passing Soil Gas at a Source during SMR, User Identified
- SMR: Passing Soil Gas during SMR at Tier 2 Sources, Software Evaluation
of Soil Gas Data
- SMR: Soil Gas Sample Data Summary at Soil and Groundwater Sources
- SMR: Submerged Soil Source at SMR for Soil Leaching
- SMR: Steady and Declining
REPORT SUBMITTALS – WHEN TO USE VERSION 2.51
The Tier 2/ SMR software version 2.51 is used to evaluate normal,
nonbedrock sites and to complete annual site monitoring reports (SMRs). All
standard Tier 2 Site Cleanup Reports (Tier 2 SCRs) and SMRs submitted after
July 31, 2003, must be completed using version 2.51 of the software.
Revised Tier 2 SCRs and SMRs scheduled to be submitted on or before July
31, 2003, may be completed using version 2.4 of software if the report is
submitted as scheduled. Revised reports not submitted as scheduled must be
completed using version 2.51.
Contact
Elaine Douskey at (515)281-8011 or
elaine.douskey@dnr.state.ia.us if you have questions concerning this posting.
|